Factory Price Pulse 200W/300W/500W/1000W/2000W High Power CNC Machine Laser Cleaning Raycus Source

• Customization: Available
• After-sales Service: The Whole Machine Has One-Year Warranty.
• Warranty: The Whole Machine Has One-Year Warranty.
• Model NO.: Raycus Laser Source
• Application: Biomedicine, Electronic Industry, Automotive Industry, Powder Metallurgy, Manufacturing Industry
• Technical Class: Pulse Laser
• Control: Serial / Ad (mm), Serial / Ad / Ethernet / Fieldb
• Power Density: Deep Fusion Welding
• Laser Classification: Optical Fiber Laser
• Type: Optical Fiber Transmission Laser Welding Machine
• Frequency Range: 10kHz/20-50kHz(Depends on Model)
• Spot Type: Square / Circular Homogenized Spot
• Power Range: 200W/300W/500W/1000W/2000W
• Transport Package: Wooden Box
• Specification: 700*350*500mm
• Trademark: HND LASER
• Origin: Suzhou, China
• HS Code: 8456110090
• Production Capacity: 3000/Y
• Package Size: 140.00cm * 2100.00cm * 250.00cm
• Package Gross Weight: 100.000kg

Product Description

Product Description

Traditional industrial cleaning has a variety of cleaning methods, mostly using chemical and mechanical methods for cleaning. Nowadays, the world is advocating environmental protection, industrial cleaning can be used in fewer and fewer chemicals. Therefore, we need to explore a more efficient and non-damaging cleaning method. Laser cleaning has the characteristics of no grinding, no contact, no thermal effect and suitable for all kinds of materials. It is considered to be a reliable and effective solution at present. At the same time, laser cleaning can solve the problem that can not be solved by traditional cleaning. 
Raycus has launched a new series of high power pulse fiber laser products, with high average power (200-2000 W), high single pulse energy, 
square or circular homogenized spot output, easy to use and maintain, is an ideal choice such as mold surface treatment, automobile manufacturing, 
shipbuilding, petrochemical, rubber tire manufacturing, etc.

Specification

Project	Sand blast cleaning	Drikold cleaning		Laser cleaning
		On-Line	Off-Line	On-Line	Off-Line
Stop the machine and unload the module	220min	50min	135min	25min	110min
preheat	/	-170min	-85min	-195min	-110min
Before ahd afterthe temperature(°C)	/	170/150	130/55	170/170	130/55
Cleaning time	35min	25min	30min	25min	25min
VH hole dredging	Artificial drill through	no drill,sulfer directly		no drill,sulfer directly
Dirt cleaning	mold release will remain	clean		clean

		cope and drag pattern
		on-line	off-line
time saving(min)	drikold	170	85
	laser	195	110
average curing time	15min
amount of increased tire	drikold	11	6
	laser	13	7
Unit price per tire	¥200
Each of the profits	25%
increasing  returns(yuan)	drikold	550	300
	laser	650	350
cleaning  cost(yuan)	drikold	225	179
	laser	225	179
net return(yuan)	drikold	325	75
	laser	471	171

According to the customer's field measurement, in the application of tire mold cleaning, laser cleaning and sandblasting cleaning can save 89% of the working time, and 13 tires can be increased compared with drikold cleaning. Laser cleaning of two molds can increase 128% income under off-Line. At present, Raycus' high power cleaning laser has been widely used in tire mold and other kinds of mold cleaning, with higher efficiency, better effect, no damage to the mold, and relatively higher profit margin.

Advantages & Accessories

Advantages of shutter technology

(1)Laser Cleaning
Non-contact cleaning;Accurate cleaning, accurate position;Precise size, selective cleaning;Strong environmental protection;Simple operation;Mechanized cleanliness achieved;High cleaning efficiency, saving time;The laser cleaning system is stable and requires little maintenance;Economic efficiency;

(2) Chemical Cleaning
Contact cleaning, damage substrate; cleaning uncontrollable, poor accuracy; chemical pollution environment; cleaning effect is general but uneven; process flow is complex, high requirements for operators Low cleaning efficiency, low first input high cost of consumables

(3) Mechanical Cleaning
Contact cleaning, damage substrate; cleaning is not controllable, accuracy is general; pollute the environment, cleaning effect is general, but uneven; 
The manual operation physical strength is big, needs the safety protection environment; the cleaning efficiency is low; High input for the first time, low labor cost of consumables

(4) Drikold Cleaning
Non-contact cleaning, no damage to substrate, Poor accuracy; use dry ice cleaning agent, do not pollute the environment; Excellent cleaning effect, but uneven; Simple operation, can be held or with the manipulator to achieve automatic cleaning and environmental protection; Medium cleaning efficiency; low first input; extremely high cost of consumables

(5) Sonicleaning
Contact cleaning, no damage to the substrate; can not specify the cleaning range; Use special cleaning liquid cleaning method, do not pollute the environment, cleaning effect is excellent, but the clean range is small; Simple operation, but need to add consum ables manually; Strong environmental protection; medium cleaning efficiency; low first input; medium consumption cos

Customer Workpiece Cutting Results

Derusting the metal surface

Surface dirt cleaning

Mold surface cleaning

Remove paint from the surfaceof articles

Removal of attachments from the surface of the statue

Please enter the title here

FAQ

Q1: Which model should I choose (SM or MM)?
A: Tell us your material, thickness, joint type, gap condition and target speed. We will recommend the best model and beam mode.

Q2: What is the benefit of ring spot / mixed spot?
A: It helps stabilize the molten pool, reduce spatter, and improve seam consistency—especially for battery and precision welding.

Q3: Can you support sample testing?
A: Yes. Send your samples (material + drawing). We can suggest parameters and provide welding test results.

Q4: What information is needed for a fast quotation?
A: Material, thickness, welding type (battery tab/busbar/plate), target cycle time, and your system integration requirements.